How much does fence installation cost in Rock Hill? For most York County homeowners, a new fence runs $12 to $65 per linear foot installed, which lands around $2,000 to $10,000 for an average yard (roughly 150 linear feet). The material you choose is the biggest lever: chain-link is the most affordable, wood sits in the middle, and aluminum and vinyl anchor the premium end. Here's what each option costs around Rock Hill in 2026, followed by the details that shape your final quote.
Rock Hill fence cost at a glance
| Fence type | Installed cost / linear foot | Typical 150-ft project |
|---|---|---|
| Chain-link (residential, 4'–5') | $12 – $20 | $1,800 – $3,000 |
| Wood — ranch rail (2–3 rail) | $15 – $30 | $2,250 – $4,500 |
| Wood — privacy (6') | $22 – $45 | $3,300 – $6,750 |
| Aluminum — 3-rail flat top (4'–5') | $35 – $60 | $5,250 – $9,000 |
| Vinyl / PVC — privacy (6') | $40 – $65 | $6,000 – $9,750 |
Prices include materials and professional installation and can shift with the factors below. For a number tailored to your property, try our Virtual Fence Estimator.
Chain-link fencing cost
If keeping the budget tight is the priority, residential chain-link is your most economical option in Rock Hill — about $12–$20 per linear foot installed for standard 4- and 5-foot heights. Basic galvanized mesh comes in lowest, while black vinyl-coated mesh (a big upgrade in appearance for a backyard) and taller runs sit near the top. It's a practical pick for pet areas, rear property lines, and anywhere function matters more than curb appeal.
Wood fencing cost (ranch rail & privacy)
Wood remains the most requested residential material in York County, and your style choice drives the price:
- Ranch rail (2–3 rail post-and-rail): $15–$30 per linear foot. Open and traditional, using less lumber than a solid fence, so it's among the most affordable wood styles — great for front yards, larger lots, and marking boundaries while keeping the view.
- Privacy (6' solid board): $22–$45 per linear foot. Pressure-treated pine anchors the low end; cedar and board-on-board or shadowbox designs run higher. This is the classic backyard privacy fence.
Aluminum fencing cost
An ornamental aluminum 3-rail flat-top fence in a 4- or 5-foot height typically costs $35–$60 per linear foot installed around Rock Hill. Aluminum won't rust, asks almost nothing in maintenance, and gives a polished, upscale look — which makes it a top choice for front yards, decorative enclosures, and pool areas (pool-code and taller styles cost more). Higher-grade material and extra gates raise the total.
Vinyl / PVC fencing cost
A vinyl (PVC) privacy fence is the premium, low-maintenance route — generally $40–$65 per linear foot installed for a 6-foot privacy style. It runs more than wood upfront, but it never needs staining or sealing, won't rot or warp, and shrugs off Carolina humidity, so many homeowners see it as a long-term value play. Thicker panels, added height, and lattice or decorative tops increase the price.
What affects your fence price in Rock Hill
Two similar-looking York County yards can still get very different quotes. The main variables:
- Linear footage. The biggest single driver — measure your perimeter to ballpark it.
- Height. Taller fences need more material and deeper posts, so a 6-foot privacy fence costs more per foot than a 4-foot one.
- Material and grade. As the table shows, material alone can more than double your per-foot cost.
- Gates. Each gate adds hardware and labor; a walk gate adds a few hundred dollars, a drive gate more.
- Terrain and slope. Sloped or rocky Rock Hill lots take extra labor to set posts level.
- Old fence removal. Removing and hauling off an existing fence is a separate line item.
- Permits and HOA. The City of Rock Hill and York County may require a permit or survey, and most HOAs require approval before you build.
- Site access. Narrow side yards or tight gates that block equipment add labor time.
Get an exact price for your yard
A range is a solid starting point, but every property is different. The quickest way to see your project cost — without waiting for a callback — is our Virtual Fence Estimator: enter a few details and get a personalized estimate for your Rock Hill–area yard in minutes. Want a firm, in-person quote? Request a free consultation and we'll walk the property with you.
Frequently asked questions
What's the most affordable fence in Rock Hill? Residential chain-link, at roughly $12–$20 per linear foot installed. If you prefer wood, a ranch-rail style ($15–$30 per foot) is the most budget-friendly wood option.
Is wood or vinyl a better value? Wood is cheaper to install ($22–$45 per foot for privacy vs. $40–$65 for vinyl), but vinyl needs no staining, sealing, or board replacement — so the lifetime cost gap is smaller than it first looks.
How much does adding a gate cost? A standard walk-through gate usually adds a few hundred dollars in materials and labor; a wider double or drive gate costs more. You can include gates right in the estimator.
Do I need a permit for a fence in Rock Hill, SC? Often yes — the City of Rock Hill and York County have requirements, and most HOAs require approval regardless. We help homeowners work through permit and HOA steps as part of the project.
How long does installation take? Most residential fences go in within one to three days once materials arrive, though project size, weather, and permits can affect the schedule.